NAME<\/a> sane\u2212qcam \u2212 SANE backend for Connectix QuickCam cameras<\/p>\n The sane\u2212qcam<\/b> library implements a SANE (Scanner Access Now Easy) backend that provides access Connectix QuickCam cameras.<\/p>\n This backend expects device names of the form:<\/p>\n port<\/i><\/p>\n where port<\/i> is the I\/O port address at which the device resides. This address is normally specified in hexadecimal using C syntax (e.g., 0x37b) and may be prefixed with the letter “u” (e.g., u0x37b) to force the backend to access the camera in uni-directional mode.<\/p>\n The contents of the qcam.conf<\/i> file is a list port addresses that may be connected to a Connectix QuickCam. Empty lines and everything starting from a hash mark (#) up to the end of a line are ignored. A sample configuration file is shown below:<\/p>\n 0x37b # \/dev\/lp0 In general, it is safest to list only the port addresses that really correspond to a QuickCam. For example, if one of the listed addresses actually connect to a printer, then starting up this backend will cause the printer to perform a device reset (which is generally undesirable).<\/p>\n \/etc\/sane.d\/qcam.conf<\/i><\/p>\n The backend configuration file (see also description of SANE_CONFIG_DIR<\/b> below).<\/p>\n \/usr\/lib64\/sane\/libsane\u2212qcam.a<\/i><\/p>\n The static library implementing this backend.<\/p>\n \/usr\/lib64\/sane\/libsane\u2212qcam.so<\/i><\/p>\n The shared library implementing this backend (present on systems that support dynamic loading).<\/p>\n SANE_CONFIG_DIR<\/b><\/p>\n This environment variable specifies the list of directories that may contain the configuration file. On *NIX systems, the directories are separated by a colon (\u2018:\u2019), under OS\/2, they are separated by a semi-colon (\u2018;\u2019). If this variable is not set, the configuration file is searched in two default directories: first, the current working directory (“.”) and then in \/etc\/sane.d<\/i>. If the value of the environment variable ends with the directory separator character, then the default directories are searched after the explicitly specified directories. For example, setting SANE_CONFIG_DIR<\/b> to “\/tmp\/config:” would result in directories tmp\/config<\/i>, .<\/i>, and \/etc\/sane.d<\/i> being searched (in this order).<\/p>\n SANE_DEBUG_QCAM<\/b><\/p>\n If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity.<\/p>\n David Mosberger<\/p>\n Support is currently limited to the color version of the QuickCam. The black-and-white camera is starting to work too, but I don\u2019t believe it works in all cases yet. Reportedly, acquiring images of certain sizes work fine, but others result in shifted images (sounds like a problem due to byte-padding).<\/p>\n The program needs root-privileges since it needs to be able to access the camera\u2019s I\/O ports.<\/p>\n sane<\/b>(7)<\/p>\n sane\u2212qcam \u2212 SANE backend for Connectix QuickCam cameras <\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[959],"tags":[961,1291,1548],"class_list":["post-4601","post","type-post","status-publish","format-standard","hentry","category-5-formatos-de-ficheros","tag-961","tag-man5","tag-sane-qcam"],"gutentor_comment":0,"_links":{"self":[{"href":"https:\/\/lode.uno\/linux-man\/wp-json\/wp\/v2\/posts\/4601","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/lode.uno\/linux-man\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/lode.uno\/linux-man\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/lode.uno\/linux-man\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/lode.uno\/linux-man\/wp-json\/wp\/v2\/comments?post=4601"}],"version-history":[{"count":0,"href":"https:\/\/lode.uno\/linux-man\/wp-json\/wp\/v2\/posts\/4601\/revisions"}],"wp:attachment":[{"href":"https:\/\/lode.uno\/linux-man\/wp-json\/wp\/v2\/media?parent=4601"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/lode.uno\/linux-man\/wp-json\/wp\/v2\/categories?post=4601"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/lode.uno\/linux-man\/wp-json\/wp\/v2\/tags?post=4601"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
DESCRIPTION<\/a>
DEVICE NAMES<\/a>
CONFIGURATION<\/a>
FILES<\/a>
ENVIRONMENT<\/a>
AUTHOR<\/a>
BUGS<\/a>
SEE ALSO<\/a> <\/p>\n
\nNAME <\/a> <\/h2>\n
DESCRIPTION <\/a> <\/h2>\n
DEVICE NAMES <\/a> <\/h2>\n
CONFIGURATION <\/a> <\/h2>\n
0x378 # \/dev\/lp1
u0x278 # \/dev\/lp2 forced in uni-directional mode
0x3bc # \/dev\/lp0 (alternate address)<\/p>\nFILES <\/a> <\/h2>\n
ENVIRONMENT <\/a> <\/h2>\n
AUTHOR <\/a> <\/h2>\n
BUGS <\/a> <\/h2>\n
SEE ALSO <\/a> <\/h2>\n
\n","protected":false},"excerpt":{"rendered":"