NAME<\/a> sane\u2212teco1 \u2212 SANE backend for TECO \/ RELISYS scanners<\/p>\n The sane\u2212teco1<\/b> library implements a SANE (Scanner Access Now Easy) backend that provides access to some TECO SCSI flatbed scanners. This backend should be considered beta-quality<\/b> software! TECO scanners are sold under various brands like RELISYS, PIOTECH, TRUST. This backend may or may not support yours.<\/p>\n The scanners that should work with this backend are:<\/p>\n Vendor Model TECO model status Note that the untested scanner will not be directly supported. You should contact the author for that.<\/p>\n The TECO VM number can usually be found at the back of the scanner. It is also part of the FCC ID. sane\u2212find\u2212scanner \u2212v<\/i> will also show the SCSI inquiry, and if it is a TECO scanner, the name will be there too.<\/p>\n The options the backend supports can either be selected through command line options to programs like scanimage<\/b>(1) or through GUI elements in xscanimage<\/b>(1) or xsane<\/b>(1).<\/p>\n If you have any success with a scanner not listed here, or if you notice any strange behavior, please report to the backend maintainer or to the SANE mailing list.<\/p>\n Valid command line options and their syntax can be listed by using:<\/p>\n scanimage \u2212\u2212help \u2212d teco1<\/p>\n Scan Mode Selects the basic mode of operation of the scanner. Valid choices are Black & White<\/i>, Grayscale<\/i> and Color<\/i>.<\/p>\n The Black & White<\/i> mode is for black and white only (1 bit). Grayscale<\/i> will produce 256 levels of gray (8 bits). Color<\/i> will produce a 24 bit color image.<\/p>\n \u2212\u2212resolution 1..600<\/b><\/p>\n Selects the resolution for a scan. The scanner can do all resolutions between 1 and 600, in increments of 1.<\/p>\n Geometry options Controls the scan area: \u2212l<\/b> sets the top left x coordinate, \u2212t<\/b> the top left y coordinate, \u2212x<\/b> selects the width and \u2212y<\/b> the height of the scan area. All parameters are specified in millimeters by default.<\/p>\n Enhancement options (color mode only) allows the user to specify a gamma table (see the next 3 parameters).<\/p>\n \u2212\u2212red\u2212gamma\u2212table<\/b><\/p>\n Can be used to download a user defined gamma table for the red channel. The table must be 256 bytes long. Color mode only.<\/p>\n \u2212\u2212green\u2212gamma\u2212table<\/b><\/p>\n Can be used to download a user defined gamma table for the green channel. The table must be 256 bytes long. Color mode only.<\/p>\n \u2212\u2212blue\u2212gamma\u2212table<\/b><\/p>\n Can be used to download a user defined gamma table for the blue channel. The table must be 256 bytes long. Color mode only.<\/p>\n \u2212\u2212dither Line art|2×2|3×3|4×4 bayer|4×4 smooth|8×8 bayer|8×8 smooth|8×8 Select the dither mask to use. Black & White only.<\/p>\n \u2212\u2212preview<\/b><\/p>\n Requests a preview scan. The resolution used is 22 dpi and the scan area is the maximum allowed. The scan mode is user selected. The default is “no”.<\/p>\n The configuration file \/etc\/sane.d\/teco1.conf<\/i> supports only one item: the device name to use (eg \/dev\/scanner<\/i>).<\/p>\n \/usr\/lib64\/sane\/libsane\u2212teco1.a<\/i><\/p>\n The static library implementing this backend.<\/p>\n \/usr\/lib64\/sane\/libsane\u2212teco1.so<\/i><\/p>\n The shared library implementing this backend (present on systems that support dynamic loading).<\/p>\n SANE_DEBUG_TECO1<\/b><\/p>\n If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity.<\/p>\n The windows TWAIN driver has many more options than this SANE backend. However they are only software adjustments. This backend only implements what the scanner can support.<\/p>\n None known.<\/p>\n sane\u2212scsi<\/b>(5), scanimage<\/b>(1), xscanimage<\/b>(1), xsane<\/b>(1), sane<\/b>(7)<\/p>\n The package is actively maintained by Frank Zago.<\/p>\n
DESCRIPTION<\/a>
CONFIGURATION FILE<\/a>
FILES<\/a>
ENVIRONMENT<\/a>
LIMITATIONS<\/a>
BUGS<\/a>
SEE ALSO<\/a>
AUTHOR<\/a>
CREDITS<\/a> <\/p>\n
\nNAME <\/a> <\/h2>\n
DESCRIPTION <\/a> <\/h2>\n
———————- ————– ———–
Relisys AVEC 2400 VM3520 tested
Relisys AVEC 2412 VM3520+ tested
Relisys AVEC 4800 VM4530 untested
Relisys AVEC 4816 VM4530+ untested
Relisys RELI 2400 VM3530 untested
Relisys RELI 2412 VM3530+ tested
Relisys RELI 2412 VM3530+ untested
Relisys RELI 4816 VM4540 tested
Relisys RELI 4830 VM4542 tested
Relisys RELI 9600 VM6530 untested
Relisys RELI 9612 VM6530* untested
Relisys RELI 9624 VM6530+ untested
Relisys RELI 9630 VM6540 untested
Relisys RELI DS15 VM3440 untested
Relisys RELI DS6 VM3420 untested
Dextra DF-600P VM3510 tested
Dextra DF-4830T VM4542 untested
Dextra DF-1200T+ VM3530+ untested
Dextra DF-9624 VM6530+ untested<\/p>\n
\u2212\u2212mode Black & White|Grayscale|Color<\/b><\/p>\n
\u2212l \u2212t \u2212x \u2212y<\/b><\/p>\n
\u2212\u2212custom\u2212gamma<\/b><\/p>\n
horizontal|8×8 vertical<\/b><\/p>\nCONFIGURATION FILE <\/a> <\/h2>\n
FILES <\/a> <\/h2>\n
ENVIRONMENT <\/a> <\/h2>\n
LIMITATIONS <\/a> <\/h2>\n
BUGS <\/a> <\/h2>\n
SEE ALSO <\/a> <\/h2>\n
AUTHOR <\/a> <\/h2>\n